The cleaning effect is good, the cleaning degree is high and all the workpieces are clean consistent. Cleaning speed, improve production efficiency, do not require human contact with cleaning fluid, safe and reliable. Deep holes, fine seams and workpiece scoffers can also be cleaned. No damage to the surface of the workpiece, saving solvents, heat, work site and labor.
Ultrasonic cleaning methods more than the general conventional cleaning methods, especially the surface of the workpiece is more complex, such as some surface uneven, there are blind holes of mechanical components, some special small and clean up the higher requirements of products such as: watches and precision machinery parts, electronic components, circuit board components, etc. , the use of ultrasonic cleaning can achieve a very good effect.
Ultrasonic cleaning mechanism mainly has the following aspects: due to the cavitation bubble burst to produce a strong shock wave, a part of the dirt layer under the effect of shock wave is stripped down, dispersed, emulsified, shedding. Because of the airing phenomenon of bubbles, the impact of the formation of dirt layer and the surface between the gap and gap penetration, because of this small bubble and acoustic pressure synchronous expansion, contraction, like peeling the physical force repeatedly act on the dirt layer, the dirt layer layer is stripped, the bubble continues to penetrate in it, until the dirt layer is completely stripped. This is the vaking secondary effect. The impact of ultrasonic vibration on dirt in the cleaning fluid during ultrasonic cleaning. Ultrasound accelerates the process of dissolving the chemical cleaning agent to the dirt, and the chemical force is combined with the physical force to speed up the cleaning process.

